Select Page

kindly pls be informed.
this is to inform you, at the request of our client – we will be given the
chance to supply the following personnel below, starting next October 2013.
the job would likely be for 3 years term with possibility of 2 years extension
and it is a job with 28 days on/off cycle (for offshore based personnel).

A. SENIOR PLANT INSPECTOR
we will need 9 people with back to back system (16 positions offshore & 2
positions onshore) – so it is a total of 18 persons required.
the minimum requirements are as below:
1. having CSWIP WI 3.1 or AWS CWI with RI (if having no RI certificate, ASNT RI
training/qualification can be provided by company with special arrangement) or
having CSWIP 3.2 SWI or AWS SCWI
2. having min. ASNT L2 in UT/MT/PT
3. having API 570 & 510 (if having only one API qualification, training can be
provided by company with special arrangement) or min. having CSWIP PI L1.
4. having a NACE CIP L2 or BGas CSWIP Painting/Site Coating qualification would
be an advantage.
5. having 5 years of experience in maintenance inspection.

PLS SEND YOUR CV AND CERTIFICATES COPY TO: k2i.tndt@yahoo.co.id

B. ABSEILOR/ROPE ACCESS NDT INSPECTOR
we will need min. 7 teams (with each team consist of 3 persons) with back to
back system – so it is a total of min. 42 persons required.
the minimum requirements are as below:
1. having abseil/rope access ticket – level 3/2/1
2. having NDT level 2 – min. ASNT L2 in UT/MT/PT with PCN/CSWIP certification
would be a great advantage
3. having 5 years of experience in maintenance inspection.

PLS SEND YOUR CV AND CERTIFICATES COPY TO: k2i.tndt@gmail.com

C. OTHER POSITIONS
1. Corrosion technician: min. NACE corrosion technician certificate – with 2
years experience in corrosion monitoring
2. CP tester: min. NACE or CSWIP CP L1 certificate – with 3 years experience in
CP survey/testing
3. Material inspector: min. ASNT L1 in UT/MT/PT – with 2 years experience in
material inspection
4. Coating/Painting Inspector: min. NACE CIP L2 or BGas/CSWIP Painting Gr.2 or
BGas/CSWIP Gr. 3 + Site Coating Inspector – with 3 years experience in
coating/painting work
5. Lifting Equipment Inspector: min. ASNT L2 in MT/PT with 5 years experience in
lifting equipment inspection.
6. HSE officer: min. NEBOSH certificate+LA/safety management trainings – with 6
years experience in HSE work
7. Planner: min. having PRIMAVERA or PROJECT SCHEDULE 6/7 or other certificate
of planning management software – with 4 years experience in project/maintenance
work planning.
the following positions require the candidate to have either
electrical/mechanical/metallurgy/welding/corrosion engineering degree.
8. CP Engineer: NACE CP L3 (specialist) or equivalent certificate, with 5 years
in CP design & maintenance work.
9. Inspection Engineer: having API 510 & 570 certificate + min. ASNT RI with 5
years experience in asset integrity management.
10. RBI Engineer: having API 510 & 570 certificate + min. NACE Corrosion
Technologist with 5 years experience in asset integrity management.

PLS SEND YOUR CV AND CERTIFICATES COPY TO: k2i.tndt@yahoo.co.id

NOTE:
potential candidates for A & B positions above will be provided with ASNT L2
training+qualification in visual inspection (VT) method, to suit with client’s
existing inspection procedures and standards, which will be conducted in
July/August/September 2013.

should you feel like meeting the requirements and looking for new horizon at
your work, pls send your CV and copy of certificates to the above email
addresses.
thank you for your kind attention.

regards,
k2i.tndt

Share This