Select Page
if interested, pls send ur CV to
 
 

Clients : Marine, Oil & Gas , Shipyard Ind

 
For Singapore:
2 x Sub-contract Executive
6 x QS
4 x Planning Engineer
1 x E&I Drafter ( Lead ) 

1 X Design Engineer ( Need to know how to perform structural design calculation by using STAAD PRO V8i is a must)
3 x Structural Drafter ( 2 x 1 yr contract, and 1 Permanent post)
1 x E&I Drafter Lead
1 x Senior Structural Engineer cum Checker (Section Head) – Degree Holder
1 x HVAC Lead Engineer ( Torrect  )
3 x Project Manager
4 x Construction Manager
2 x Painting Inspector Cum Supervisor
6 x Dimensional Controller 
 
 
For China: ( 1 Yr Contract, Subject to Renewable / convert to Perm )
2 x Safety Supervisor
2 x Structural / Piping Supervisor ( URGENT ) Involved in Fabrication & Installation
2 x Piping Supervisor
4 x QAQC Inspector
1 x Scaffold Supervisor
 
For Malaysia ( Contract or Perm )
Construction Superintendent (Piping/Structure)

·         Supervisor (piping/structure)
·         Safety Supervisor

 
———————————————————————————————————————
 
 

Civil & Structural Engineer
 
Responsibilities:
 
  • Responsible for leading designer and draftsman for Civil & Structural design requirements of the project
  • Prepare and review drawing, datasheet and specifications for Civil & Structural design
  • Conversant with British codes BSC5950 and BS8110
  • Able to use STAADPRO for the analysis and design of steel and reinforced concrete structures and foundations
  • Knowledge in storm water drainage, roads and pavement design would be an advantage
  • Able to carry out basic design and quantity take-off for project tendering
  • To check steel and RC structures drawings prepared by draftsperson
  • Good team player with good interpersonal skills
  • Willing to travel and visit work site for taking site measurement and for site check
 
Requirements:
 
  • Minimum Degree in Civil & Structural Engineering or related fields of studies
  • Minimum 2 to 5 years relevant working experience
  • Proficient in Microsoft Office applications
  • Proficient in STAADPRO
  • Willing to travel abroad
 

 
 
 
Construction Manager x 4
 
 
·         Report to respective Project Manager.
·         Responsible for all the day to day construction, operational and administration activities at sites.
·         In charge of workers’ relocation (for all trades) / approval and to oversee all skid fabrication projects.
·         Responsible to client and Project Manager for construction as scheduled
·         Responsible for preparation of planning and progress report every week and report to Project Manager and client
·         Monitor progress closely, identify problem areas and initiate action plans and involve Project Manager when necessary
·         Conduct weekly progress meeting with project team
·         Coordinate activities of various disciplines during construction phase
·         Control activities of sub-contractors from the point of view of productivity, safety, regulations, quality and schedule
·         Implement safety and quality systems
·         Keep site discipline at the highest levels
·         Familiar with scope of work as given by the client and as given to sub-contractor for the project
·         Take charge together with Project Manager in planning the overall construction sequence for smooth work implementation.
·         Any other tasks and responsibilities assigned from time to time
 
 
 
Requirement:< /span>

·   Diploma in Mechanical Engineering/Offshore Engineering/Production Engineering

  • Min 5  yrs experience as CM or as Construction Engineer.
  • Salary neg
  • Prefer short notice period
Project Manager x 4
 
Your main areas of involvement as Project Manager are as follows:-
·         To be fully aware of company’s ISO standard requirements specified in our QMS and OHSE Manual.
·         To be fully aware of project specifications, safety requirements, scope of work and supply matrix etc.
·         Responsible for the full and safe completion of project in good quality and within the project schedule.
·         Exercise stringent control on project budget given and be responsible to capture any variations / additional claims to clients.
·         Be confident on project management and problem solving.
·         Be prudent when verifying / approving timesheets, purchase requisitions and other project related documents.
 
Additional duties and responsibilities as Project Manager shall include the followings:-
·         Report to General Manager, Operations (GM-O).
  • Responsible for the management of projects as assigned
  • Act and undertake role of engineering coordinator to ensure all engineering drawings are executed as per schedule requirement
  • Coordinate with multi-disciplines and clients during engineering phase to provide technical inputs as much as possible.
  • Represent company to liaise with clients on all matters.
  • Responsible for preparation of project execution plans, review schedules and provides effective feed back to planning department for project monitoring and execution.
  • Monitor and closely coordinate with Procurement of materials.
  • Monitor all engineering and material deliverables from clients.
  • Liaise with Contracts Dept and Project Managers on the selection of sub-contractors.
  • After engineering phase, to supervise the construction team activities for the project.
  • Monitor budget and ensure the project is executed at an optimum cost and on time.
  • Conduct project VSCC meetings.
  • Ensure all relevant documentation are prepared and submitted to QA/QC department.
  • Ensure all construction activities are performed as per stipulated schedule.
  • Ensure HSE standards are complied and followed strictly by sub-contractors.
  • Ensure discipline on board is maintained at all times.
  • Ensure time-keeping and house-keeping by sub-contractors are being complied.
 
Requirements:
·         Singaporean/S’PR, 
·         Diploma/Degree in Engineering with min 3 yrs of experiences as PM or 5 yrs of experience as Construction Manager/Project Engineer.
·         Salary neg
·         Prefer short notice period

 

We have an urgent opening for TLER Packages Lead Engineer, Local/S’PR, salary range S$4,000 to S$5,000 neg for 1 year contract:
 ( KNowledge in HVAC , E&I )
Requirement:
·         Sound knowledge of HVAC Design/Installation
·         At least 3 years relevant experiences
·         At lease Degree holder and able to communicate at all levels
·         Liaise with sub-vendor and client on day to day basis on project issues
·         Make sure documentation/submissions by sub-vendor are carried on time
·         Are to highlight schedule/technical issues related to HVAC

 

 
Civil / Structural Draftsman
 
 Responsibilities:
  • Ability to do shop drawing for structural steel work in AutoCad
  • Drafting of civil works (roads, drainage etc)
  • Drafting of steel and concrete structures
  • Able to liaise with piping, tankage and E&I personnel
  • Able to do material take-off for structural steel work or reinforced concrete works from drawings
 
Rquirements:
  • Minimum 3 to 5 years relevant working experience
  • Certificate or Diploma in Civil/Structural Engineering
  • Competent in using AutoCad for Civil and Structural drafting
  • Candidates with basic knowledge in Architectural Drafting would be an advantage

 
Civil Supervisor / Engineer
 
Responsibilities:
 
  • Responsible for the supervision of civil works on-going at site, ensure timely and smooth progress of work
  • To alert on critical matters to the Project Manger
  • Attend site meetings, prepare work schedules and manpower allocations
  • Review projects specifications, engineering drawings, material requisition, cost control and project supervision
  • Respo
    nsible for all aspects of site safety
  • Perform other ad-hoc duties that assigned by the Superior
 
Requirements:
 
  • Minimum 2 to 3 years relevant working experience in Oil and Gas Industry
  • Diploma in Civil Engineering or related field of studies
  • Certified in BCSS would be an added advantage
 
 
 
 
Engineer/Designer (Tankage & Vessel)
 
Responsibilities:
  • Design and drafting of storage tanks, pressure vessels and structures
  • Review engineering documents for statutory submission and for construction
  • Review and implement project specification
  • Execute basic and detailed engineering design including calculations/analysis as per specifications
  • Prepare material take-off for project procurement and bid proposals
  • Provide technical assistance to construction teams
  • Attend site check/verification
 
Requirements:
  • Minimum 3 years relevant working experience for Designer and 5 years for Engineer position
  • Degree/Diploma in Mechanical Engineering or related field of studies
  • Computer literate and hand-on experienced on Microsoft Office, AutoCAD, Tank Software
 
We are seeking a lower level person, e.g. skilled draftsman or assistant designer with tank/vessel background
 
 
 
 
Draftsman (Process)
 
Responsibilities:
  • Prepare, printing and filing the documents and drawings for submission
  • Prepare product, utility, fire fighting system, slop system, heating facilities and vapor treatment P&ID
  • Involve in Hydraulic calculation, ISO 9001:2000 and instrumentation
  • Review vendor technical specification and perform technical clarification with vendor
 
Requirements:
  • Diploma in Mechanical/ Chemical Engineering or related field of studies
  • Minimum 2 years relevant working experience
  • Hands-on experience on AutoCAD and Smart Plant P&ID
 
 
Mechanical Engineer ( Rotating Design )
 
Responsibilities:
·         Process design for Oil/Gas terminal (Hydraulic calculation, system design, fire fighting system design etc)
·         Evaluation of static/rotating equipment
·         Preparation of equipment list, data sheet, specification, requisition and technical proposal
·         Communicate with vendor
·         Review vendor technical specification and perform technical clarification with vendor
·         Knowledge of equipment selection (pump, loading facilities, fire fighting facilities, environmental protection equipment, etc)
·         Knowledge of the international code and standards (i.e. ASME, API, ANSI, NFPA, IP)
·         Able to read P&ID
·         Able to interface with other engineering discipline
 
Requirements:
  • Degree in Mechanical/ Chemical Engineering or related field of studies
  • Minimum 2 years relevant working experience, fresh graduates are welcome to apply
  • Able to use AutoCAD software and Microsoft Office applications
  • Knowledge of process design would be an advantage
  • Good team player with good interpersonal skills
  • Willing to travel abroad

 
Project Engineer
 
Responsibilities:
 
  • Ensure project works and service quality, goods delivery are in compliance with contractual requirements
  • Schedule works, coordinate, implement and manage projects
  • Project work execution. Ensure timely work progress, taking account the budgeted qualities and cost
  • Develop, maintain and manage working relationships with customers and all related parties
  • Prepare and submit project progress reports and documentations when required
  • Quotation preparation
  • Compiling of data book
  • Review and amendments of drawings
  • Site supervision
  • Any other tasks assigned by the superior
 
Requirements:
 
  • Minimum 2 years experience
  • Minimum Diploma in Civil/Mechanical Engineering  field or others with relevant experience also welcome to apply
  • Preferably Singaporean/PR/Malaysian
  • Knowledge in AutoCad
  • Willing to work at site

 
 
 
QA Engineer
 
·        Reports to Snr Manager/Manager(QA/QC) and or Asst. QA/QC Manager in the absence of HOD
·        Responsible to prepare and conduct Project Specific Quality requirements training to Production Supervisors and Sub-contractors QC Personnel.
·        Responsible for establishing project specific Work Procedures and Instructions.
·        Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
< span>·        Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
·        Liaise with client in relation to Quality on Project Specific audits.
·        Schedule and conduct Project Specific Quality Audit as per agreed Plan.
·        Monitor the issue and close-out of NCR’s for the project and maintain its register.
·        Monitor progressive compilation of the MDR for the project as work progress.
 
QA/QC inspector
·        Responsible to perform Surveillance Inspection to ensure that the construction work is performed and duly meeting the project specific Quality Requirements.
·        Responsible for verification of in process inspection, final inspection and welding.
·        Responsible towards welding control and inspection.
·        Responsible to prepare and maintain Welding Audit Report during construction.
·        Responsible to record result of inspections and maintain records of specific items  as per contract/specifications.
·        Responsible to administer AFI request to Client and 3rd party and coordinate for inspection as identified in the respective discipline ITP.
·        Responsible to raise Non-conformance reports as seen during inspection and follow-up on status of rework and close-out.
·        Responsible to arrange for proper NDT requirements as per specifications.
·        Responsible to interpret RT films pertaining to welding joints.
·        Responsible to review all NDT reports and approval.
·        Responsible to establish and maintain inspection and NDT progress status on weekly basis.
·        Responsible to generate weekly weld rejection rate summary.
·        Responsible to witness all testing activities.
·        Responsible to monitor PWHT.
·        Responsible to attend to all potential quality problems to prevent occurrence of defects.
·        Responsible for preparation of Test Packs for Piping Hydro static testing
·        Responsible for the preparation/compilation of the final punch list prior to delivery of the fabricated and assembled components.
 
 
Cheers
Lynn
 
=====================
When you love your job, you will not have to work for the rest of your life.
Life is too short to be in the wrong job

 
I Plus Q Human Resources Pte Ltd
20 Maxwell Road
#08-01 Maxwell House
Singapore 069311
DID  : (065) 62202473
Mobile : (065) 96784263
URL : www.iplusq.com.sg
Registration No : R1101652
Licence No : 97C4989
Share This