Skip to main content

Vacancy Sr. Process Engineer and Process Engineer in KBR Indonesia

KBR Is a leading global engineering, construction and services company, operates in more than 50 countries including Asia Pacific region, supporting the energy, hydrocarbon, government services and civil infrastructure sectors. KBR serves in many of the growing end-markets, particularly gas monetization and more than half of the world’s operating liquefied natural gas (LNG) production capacities over the past 30 years alone, or with join ventures partners. KBR offers a wide range of services through its Upstream, Downstream, Technology, Services, Government and Infrastructure, and Ventures business segments.

To fulfill the requirements in the recently awarded Projects, the Jakarta Engineering Office seeks talented and experienced Indonesian nationals to fill the following positions:
 
 
PROCESS ENGINEER
The individual would have a degree in Chemical Engineering, 3 – 7 years of experience in process engineering for oil and gas facilities, both onshore and offshore, including in pre-project, feasibility, conceptual studies and detailed design.
Principal Accountabilities:
  • Prepare design work to ensure it meets industry standards and regulations, company procedure, and is consistent with the project objectives of safety, operability, reliability, cost effectiveness
Should have knowledge of:
  • Process simulation of physical fluid properties.
  • Detailed knowledge of the basic data and phase behaviors; equations of states, phase envelopes of gas and oil components.
  • Simulation of steady state modeling & steady state multi-phase flow using computer software.
  • Development of PFD/UFD, material balances, and P&ID
  • Development of process calculation of hydraulic, pumps, heat transfer, separation, relief system design including flare system, blow down and low temperature study
  • Development of process datasheet of equipment and instrumentation.
  • Specification of control philosophies; fail-safe actions of control valves and the measurement of material balances.
  • Development of SAFE chart, ESD Logic Diagram, Cause and Effect Matrix Diagram
  • Process engineering software (Hysys, Pipesim/Pipephase, Flarenet etc)
SR / LEAD PROCESS ENGINEER
The individual would have a degree in Chemical Engineering, preferably 10+ years of experience in process engineering for oil and gas facilities, both onshore and offshore, including 3-5 years in pre-project, feasibility, conceptual studies and detailed design.
Principal Accountabilities:
  • Review and prepare design work to ensure it meets industry standards and regulations, company procedure, and is consistent with the project objectives of safety, operability, reliability, cost effectiveness
  • Manage the consultants working in his/her area of responsibility to ensure that they are working to the appropriate level of efficiency and within the allocated schedule and budget.
  • Ability to lead and function as part of a multi-disciplinary engineering team to maintain clear understanding of design issues, progress and objectives is required.
Should have knowledge of:
  • Process simulation of physical fluid properties.
  • Detailed knowledge of the basic data and phase behaviors; equations of states, phase envelopes of gas and oil components.
  • Simulation of steady state modeling & steady state multi-phase flow using computer software.
  • Design of appropriate systems to meet the Required Throughput Specifications.
  • Development of PFD/UFD, material balances, and P&ID
  • Development of process calculation of hydraulic, pumps, heat transfer, separation, relief system design including flare system, blow down and low temperature study
  • Development of process datasheet of equipment and instrumentation.
  • Specification of control philosophies; fail-safe actions of control valves and the measurement of material balances.
  • Specification and design of Process Shutdown, Emergency Shutdown and Instrumented Protective Function safeguarding systems.
  • Development of SAFE chart, ESD Logic Diagram, Cause and Effect Matrix Diagram
  • Process engineering software (Hysys, Pipesim/Pipephase, Flarenet etc)
  • HAZOP/SIL review including action close-out.
GENERAL REQUIREMENTS
1.  Good command of both written and spoken English & Bahasa Indonesia
2.  Good communication skills and team player
3.  Good HSE Awareness and Trustworthy
4.  Willing to take overseas Assignment 
Interested candidates should send their resume in English to:
 
Email: FJKTREC@kbr.com
Mentioning the position applied in the subject email
Not later than 1 week after this advertisement.
 
DO NOT attach scanned certificates, transcripts and reference letters and ONLY SHORT-LISTED candidates will be contacted.
Labels:

Comments

Post a Comment

Popular posts from this blog

DOWNLOAD BUKU: THE TRUTH IS OUT THERE KARYA CAHYO HARDO

  Buku ini adalah kumpulan kisah pengalaman seorang pekerja lapangan di bidang Migas Ditujukan untuk kawan-kawan para pekerja lapangan dan para sarjana teknik yang baru bertugas sebagai Insinyur Proses di lapangan. Pengantar Penulis Saya masih teringat ketika lulus dari jurusan Teknik Kimia dan langsung berhadapan dengan dunia nyata (pabrik minyak dan gas) dan tergagap-gagap dalam menghadapi problem di lapangan yang menuntut persyaratan dari seorang insinyur proses dalam memahami suatu permasalahan dengan cepat, dan terkadang butuh kecerdikan – yang sanggup menjembatani antara teori pendidikan tinggi dan dunia nyata (=dunia kerja). Semakin lama bekerja di front line operation – dalam hal troubleshooting – semakin memperkaya kita dalam memahami permasalahan-permasalahan proses berikutnya. Menurut hemat saya, masalah-masalah troubleshooting proses di lapangan seringkali adalah masalah yang sederhana, namun terkadang menjadi ruwet karena tidak tahu harus dari mana memulainya. Hal ters...
Post a Comment
Read more

Leak Off Test

Prinsipnya LOT (leak off test) dilakukan untuk menentukan tekanan dimana formasi mulai rekah. Tujuannya: 1. Menentukan MASP (Max. Allowable Surface Pressure). Yaitu batasan max surface pressure yg boleh kita terapkan selama drilling operation, tanpa mengakibatkan formasi rekah (fracture). 2. Dengan mengetahui MASP, berarti juga kita bisa mengetahui Max. mud weight yg boleh kita terapkan selama drilling operation, tanpa mengakibatkan formasi rekah (fracture). 3. Menentukan Kick Tolerance. Yaitu maximum kick size yg masih bisa kita tolerir untuk dihandle. Parameter ini nantinya juga berperan untuk menentukan depth casing shoe yang aman dari sudut pandang well control issue. 4. Mengecek kualitas sealing antara cement dengan casing Tanya - BGP HSESupv. BGP.HSESupv@petrochina Dear all Saat masih di rig dulu saya sering mendengar istilah leak off test. dimana step2nya kira kira sebagai berikut 1. Cementing Job 2. TSK ,masuk string dan bor kurang lebih 3 meter dibawah shoe. 3. dilakukan ...
4 comments
Read more

Shutdown System

Apa yang membedakan antara PSD dan ESD? Secara umum keduanya berfungsi "membawa" sistem pemroses ke "keadaan yang lebih aman". Namun secara spesifik PSD lebih ditujukan kepada sebab sebab Process Specific seperti: Overpressure di bagian hilir kompressor, temperatur tinggi di heater untuk fuel gas, level yang terlau rendah di slug catcher, dst. Sementara ESD lebih ditujukan untuk menanggulangi dampak dari suatu kejadian yang sudah terjadi: misalnya gas yang telah bocor, kebakaran kecil di technical room, kebocoran minyak di pipeline, dst. Kedua jenis shutdown ini dapat pula dipicu oleh spurious trip atau gagalnya sistem shutdown tanpa sebab sebab yang diketahui dengan jelas. lebih rendah levelnya dari PSD ialah USD, atau Unit shutdown. Perlu dicamkan penamaan bisa berbeda beda antar company, misalnya ada yang menyebutnya sebagai ESD1, ESD2, ESD3 dan seterusnya, ada yang menyebutkannya sebagai ESD, PSD, USD dan seterusnya. Tidak penting, yang penting pahami betul fi...
Post a Comment
Read more